The Mojo is a FPGA development board that is designed from the ground up to be easy to use.
The entire goal of the Mojo is to make getting started with FPGA and digital design as easy as possible. To go along with our board we have tutorials to help you get started and expand you knowledge of digital design.
Warning: The USB port on this board is somewhat fragile and will break off with excessive force. We recommend being very careful with the board or gluing the port down with epoxy. If you are worried about it, the Mojo V3 offers a much stronger USB port.
The Mojo is made in the USA.
The Mojo features include
- Spartan 6 XC6SLX9 FPGA
- 84 digital IO pins
- 8 analog inputs
- 8 general purpose LEDs
- 1 reset button
- 1 LED to show when the FPGA is correctly configured
- On board voltage regulation that can handle 4.8V - 12V
- A microcontroller (ATmega16U4) used for configuring the FPGA, USB communications, and reading the analog pins
- On board flash memory to store the FPGA configuration file
This work is licensed under a Creative Commons Attribution-ShareAlike 3.0 Unported License.
Check out the tutorials listed here for some basics to get you up and running.
You may also be interested in the following product(s)